LED work lights

LED Work lights

Looking for the highest quality work light for transport, automotive, agricultural or construction?

Then you are in the right place at TRALERT®. We are lighting specialists since 2005 and also importer and manufacturer of certified work lights.

With both exclusive in-house products and a selection of high-quality work lights from leading manufacturers such as Ecco, Fristom and Vignal Group, we are your lighting partner.

Large range of professional work lights

Many of these professional LED work lights are multi-voltage.

This means that the LED work light has a voltage range of 9-36 volts, making good LED work lights capable of handling peak voltages.

Small and large work lights

We have small LED work lights that are nevertheless very powerful, but also large professional work lights. The lumens within these LED lights range from 500 to 15,000 lumen.

Our work lights are available in round, square and the rectangular varieties. So we can always offer you the right lighting solution.

EU-certified LED work lights

TRALERT®'s product range includes work lights that are R23 certified. This means that you may use these lights as reversing lights. These R23 lights should be mounted at a specific angle of 30 degrees on your vehicle. This allows them to be used as reversing lights. Are you going to install the lights at a higher angle? Then beware! This may cause you to blind oncoming traffic.

Which LED work light is best?

Finding a good LED work light is not easy and we at ^TRALERT® understand that only too well. The most important thing is that the light gives off a good amount of light so that you can work comfortably. The best work light is a broad term, but we think the reliability and service life of the work light is crucial. Once fitted, you do not want to have to worry about it.

At ^TRALERT® we have a sophisticated product range in various quality and price categories, where the ratio between these two aspects is always considered very important. Do you already know which LED work light is best suited for your work? Then you can easily order it online. If you do not yet know which LED work light is most suitable, you can easily select the right work light you are looking for by using the filters.

Order easily online via our dealer portal. When in our stock, the products are delivered immediately the next day.

Which LED work lights does the ^TRALERT® product range consist of?

As mentioned earlier, TRALERT® has a very wide range of LED work lights. On our website, you will find our very complete range of LED work lights. From standard LED work lights to professional heavy duty LED work lights for harsh conditions. And from a wide-beam LED work light to 12 and 24 V driving lights.

You will find work lights in a voltage range 9-30v to 9-110v (high voltage) and a wide choice of different connection options (including Deutsch-connector, Super Seal, AMP). In short, a solution to virtually every question. Were you unable to find what you were looking for? Let us know and we will see if we can help you with your specific LED work light requirement.

How to order LED work lights from ^TRALERT®.

Ordering an LED work light from ^TRALERT® is quick and easy. You can easily order the LED work lights online. If you prefer to see the lighting in person, we recommend making an appointment with one of our representatives. They will be happy to visit you and introduce the TRALERT® product range to you. During this meeting, you can ask the necessary questions or suggest a customised solution.

We like to think along with you! If you have any questions about the product range or would like more information about the products? Feel free to contact our technical department. You can reach us by phone or e-mail. The contact details can be found on the contact page.

Buy LED work light for a specific application

It is understandable if you do not immediately know which work light fits your machine best. Buying a work light can be quite stressful. After all, work lights must be able to give off the right light, which is of course different in every situation.

Tractors require a uniformly lit workspace, whilst on your trailer you are looking for lights that can illuminate a specific, hard-to-reach corner. Furthermore, there is also a difference between 12-Volt LED work lights and 24-Volt LED work lights. You should also bear in mind exactly what is required in terms of the cabling for the LED work light.

In many cases, these lights come with short cables. TRALERT® therefore also has work lights that are equipped with extended cables. This can come in handy when you want to illuminate hard-to-reach areas of your vehicle.

Work lights for trailers

We offer a wide range of highly suitable work lights for trailers, ideal for providing extra light whilst working. This is particularly useful when you need to load a trailer after dark. In addition to work lights, TRALERT® also offers a comprehensive range of trailer lighting.

LED work lights for truck and trailers

The lighting on your trailer combination had better be of high quality. You certainly don’t want to have to worry, when buying LED work lights for your truck, that they’ll fail at the most inopportune moments. In fact, imagine being involved in an accident caused by glare from a non-certified work light. If this accident leads to a court case, you will be held liable. You run this risk if the work light does not carry the correct certification marks.

Work light (LED) car / company van

The LED work light 12v is specially developed for vehicles with only 12V such as cars. We also have a mini LED work light in the range.

TRALERT® offers you the advantage that the majority of 12 Volt car work lights are equipped with multivoltage. Multivoltage stands for a higher voltage range. This means that you can connect the same LED work light to both your truck and your 4x4 car.

With questions such as 'what is the difference between 12V and 24V' and 'how do I connect work lights', you can always contact our LED specialists. They will be happy to help you find the optimal lights.

Lens technology in work lights

You see different 'lens techniques' within work lights, but don't know exactly what this stands for? Quite understandable, there are quite a few! Lens technology is actually a collective name for the reflector and or built-in lens. The function of this technique is to optimally spread or bundle the light. Thus we know the lens techniques TIR, RFT lens technology and Fish-eye. Each technology is incorporated separately in the work lights. The Optimus serie work lights, for instance, is fully equipped with Fish-eye lens technology. This is a convex micro lens placed over the LEDs to spread the beam optimally. Picture this as if you turned magnifying glass and shone a beam through it. By designing the lens this way, it is possible to generate more light from the same LED.

Frequently asked questions about LED work lights

Why choose TRALERT® work lights?

Work lights from TRALERT® are known to be reliable, durable and have powerful light. We also offer a technical service that will be happy to advise you on choosing the right lighting.

How long does a delivery of work lights take?

95% of orders are shipped the same day. If the LED work lights are in our stock, you will receive them the next day.

Which professional work light is suitable for my vehicle?

LED work lights from TRALERT® can be mounted on almost all vehicles. Thus, most of the range is equipped with 9-36v multivoltage. Furthermore, TRALERT® work lights are equipped with commonly used connectors.

How do I properly adjust an LED work light?

The correct adjustment of the work light is different for each vehicle. In general, you should pay attention to the mounting location, adjustment, reflector lens technology and connection to your vehicle.

How do I ensure a homogeneously lighted workplace?

A homogeneously lighted workplace is achieved by correctly mounting and adjusting your work lights. Here you can find everything about mounting work lights.